
Outdoor & Industrial UPS
1-3KVA IP65 Outdoor Online UPS
3 kVAIP65 rated
RA series High frequency outdoor UPS is used In suburban district, remote road or mountain, severe environment such as areas with high temperature(50℃), severe dust, moisture, rain, mist erosion, poor grid power quality(voltage durative higher than 260V or less than 160V, Frequency abnormal change)
- Provides a pure uninterrupted AC sine wave power supply for the outdoor communication / network equipment.
- The use of high temperature, anti cold, salt spray, anti-corrosion, anti dust, waterproof, lightning protection design.
- Advanced MCU micro processor control Technology, ensure long life reliability.
- Excellent Protection against over voltage, overload, over current, overcharge and so on.
- Strong anti-jamming capacity, Lightning, surge, short-circuit, network/fax/modem surge protection. Input L and N lines reverse wiring detection.
All features (10)
- DC start function, input RFC reuses function.
- Humanized bypass output adjustable.
- Available to work with generators.
- RS232 intelligent communication monitoring.
- AS-400 Dry contact and SNMP cars remote intelligent control.
Specifications
| Model | RA1KL | RA2KL | RA3KL | |
|---|---|---|---|---|
| Capacity | VA/W | 1000VA/800W | 2000VA/1600W | 3000VA/2400W |
| Input | Nominal Voltage | 110/115/120VAC or 200/220/230/240VAC 200/208/220/230/240VAC | ||
| Voltage Range | 115~300VAC | |||
| Power Factor | ≥0.97 | |||
| Frequency Range | 50Hz:46~54Hz; 60Hz:56~64Hz | |||
| Output | Voltage | 110/120/220/230/240(1±2%)VAC | ||
| Frequency | 50/60Hz (Adjustable); 50Hz AC Mode: Follow AC Mode (AC Range 46~54Hz); Battery Mode: 50Hz (1±0.2%) 60Hz AC Mode: Follow AC Mode (AC Range 56~64Hz); Battery Mode: 60Hz (1±0.2%) | |||
| Wave Form | Pure sine wave | |||
| Power Factor | 0.8 | |||
| Harmonic Distortion | ≤3% THD (Linear load) ≤7% THD (Non-Linear load) | |||
| Overload Capacity | 110%~150% maintain 30s then turn to bypass ourput; >150% maintain 300ms | |||
| Current Crest Ratio | 3:1 | |||
| Connections | Terminal block | |||
| Efficiency | Battery Mode | 83% | ||
| AC Mode | 85% | |||
| Battery | Type | Sealed free maintenance lead acid battery | ||
| Nominal DC voltage | 36VDC | 96VDC | 96VDC | |
| Stansard Battery Cabinet | 3*100AH | 8*100AH | 8*100AH | |
| Backup Time (Full Load) | Depens on the capacity of internal battery bank (24AH,38AH,65AH,80AH and 100AH optional) | |||
| Charge Current (Max) | 6.0A | 6.0A | 6.0A | |
| Charge Voltage (VDC) | 41.1V±0.2VDC | 110V±0.6VDC | 110V±0.6VDC | |
| Recharge Time | Depends on the capacity of internal battery bank | |||
| Bypass | Automatic Transfer | On overload and UPS failure | ||
| Before UPS Power-on | YES | |||
| Transfer Time | 0 ms(from imain to battery and vice versa); Less than 4ms from inverter to bypass and vice versa | |||
| indicators | LCD Display | UPS status, Battery capacity, loading, Fault code (LCD: I/P &O/P voltage&frequency, Battery voltage) | ||
| Audible | Bypass, Battery mode, Battery low, Overload, Fault | |||
| Communications | Intelligent RS232 serial port | Software support Windows family software, Linux, Sun network operating system, IBM Aix, Compaq True64 SGI IRIX, FreeBSD, HP-UX and MAC | ||
| SNMP (Optional) | Remote control UPS through SNMP management and Internet | |||
| USB (Optional) | Windows family software and Mac OS | |||
| Environmental | Operating Temperature | 0~40℃ | ||
| Operating Humidity | 0~95% (No condensing) | |||
| UPS dimension | L*W*H (mm)(UPS main body) | 482*380*88.4 | 482*448*88.4 | 482*448*88.4 |
| L*W*H (mm)(Cabinet) | 638*507*775 | 612*525*1511 | 612*525*1511 | |
| Weight(kg) | Net Weight (No battery) | 52.00 | 100.00 | 100.00 |